Power supply meat grinder

1, the correct installation of the power supply meat grinder?
In the meat grinder connected to power, to ensure power supply in the normal range. First open hopper, the hopper out of spare parts to dissipate into the atmosphere inside the mouth;
I ring off, remove the grate son, knives, axes strangulation. In accordance with good power, the meat grinder for cheese, pressed the switch to see the end of the tube to the output shaft rotation
Whether it is anti-clockwise rotation. If yes, indicate the correct installation. On the other hand, the error. Power should be replaced with order. After the machine at the bottom of the M6 or Luo M8
Shuan is a "potential terminal to the called party," should be a professional electrical grounding required. Power outlet hole grounding equipment or power lines should be green yellow
A solid grounding.
Fixed-line must be equipped with a full-contact open and disconnected from ≥ 3mm to cut off the electrode.

2, how to install the correct axis cutter, knife grate, and other accessories?
When the spin axis twist to the right, will be followed by strangulation axis, a knife, grate son, I installed a good lap. Axle Cutter installed, it should be the long-tail groove
With the output shaft with a long wedge-installed; will be mounted on a knife edge forward cutter Shaft front-end side of the axis; will be also installed in the sub-grate strangulation of the front axle
Side axis, and tube cutter and mouth with the pin, rotating ring missing. I tightened up lap and a half and then fade back to the appropriate deduction, the machine is operating normally
Before the beginning of meat.

3, how to adjust the tightness Triangle?
The use of machinery, such as the Triangle have found that tight-song should be shutdown. Vertical electric meat grinder to open the door hole under me, let go home LAW
Adjust the location of the motor, appropriate adjustments after locking Romanian mother in order to use; meat grinder to open the desktop case, the Romanian mother let go, after the adjustment bolt Luo
Romanian mother and then locking.
http://www.petwebsite.zoomshare.com/2.shtml
4, how to clean the machine?
Can not directly irrigation water! Can not bring electrical damp! In order to avoid leakage, the use of electric shock or impact. I should screw ring, remove the grate
Son, knives and axes twist, and then fitted with a clean finish for the next use.

5, do not replace any other meat grinder?
Some users are not used to buy meat grinder after the meat cutter, but also to make use of it. Maintenance found in some medicines used to twist, twisted plastic,
Twisted pepper sauce, such as strangulation Congjiang. We are here with you made it clear that meat grinder can only be used as a meat cutter. If you use other machines strangulation, caused by machine
Damage to the device, the loss of your commitment to customers. In the warranty period, according to deal with maintenance. Spare parts and maintenance you have to pay a certain fee. Therefore,
To remind you got the right to use the meat grinder.
http://www.getablog.net/catlifespan/30158/Meat+grinder.html